Analyses of reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems using recently developed thermodynamic rate equations

This article presents reaction rate data for the simple hydrolysis of acetic anhydride in the acetonitrile/water and acetone/water cosolvent systems and regression analyses using recently developed thermodynamic rate equations that contain electrostatic and solvent-solute terms. The isomole fraction plots for these reaction systems are linear, and previous theoretical work has shown that the electrostatic term is negligible for such systems. On the other hand, the reaction rates are dependent upon the cosolvent mole fraction, indicating that the solvent-solute term, which is modeled empirically, is significant. The results of the analyses provide the foundation for a paradigm shift away from the emphasis on electrostatic effects to more tenable explanations of kinetic behavior in solvent systems.     

Synthesis and Characterization of New Phosphorus Containing Sulfonated Polytriazoles for Proton Exchange Membrane Application

Sulfonated polytriazoles have drawn a great attention as high performance polymers and their good film forming ability. In the present study, a phosphorus containing new diazide monomer namely, bis-[4-(4′-aminophenoxy)phenyl]phenylphosphine was synthesized and accordingly, a series of phosphorus containing sulfonated polytriazoles (PTPBSH-XX) was synthesized by reacting equimolar amount of this diazide monomer (PAZ) in combination with another sulfonated diazide monomer (DSAZ) and a terminal bis-alkyne (BPALK) by the Cu (I) catalyzed azide–alkyne click polymerization. The polymers were characterized by nuclear magnetic resonance (¹H, ¹³C, ³¹P NMR) and Fourier transform infrared spectroscopic techniques. The sulfonic acid content of the copolymers also determined from the different integral values obtained from the ¹H NMR signals. The small-angle X-ray scattering results unfolded the well-separated dispersion of the hydrophilic and hydrophobic domains of the polymers. As a whole, the copolymer membranes displayed sufficient thermal, mechanical, and oxidative stabilities high with high proton conductivity and low water uptake that are essential for proton exchange membrane applications. The copolymers exhibited oxidative stability in the range of 15–24 h and had proton conductivity values were found as high as 38–110 mS cm⁻¹ at 80 °C in completely hydrated condition. Among the all copolytriazoles, PTPBSH-90 (BPALK:DSAZ:PAZ = 100:90:10) having IEC_W = 2.44 mequiv g⁻¹, showed proton conductivity as high as 119 mS cm⁻¹ at 90 °C with an activation energy of 10.40 kJ mol⁻¹ for the proton conduction. © 2020 Wiley Periodicals, Inc. J. Polym. Sci. 2020 , 58, 263–279     

Photoinitiated polymerization of methacrylates comprising phenyl moieties

Investigation of photopolymerization kinetics of 4-(4-methacryloyloxyphenyl)-butan-2-one (1) in comparison with 2-phenoxyethyl methacrylate (2) and phenyl methacrylate (3) using a UV-LED emitting at 395 nm shows significantly faster polymerization of 1 compared to both 2 and 3 at 40°C. Vitrification affects photopolymerization kinetics of all methacrylates under investigation. Interestingly, quantitative final conversion is observed during photoinitiated polymerization of 1 and 2 whereas 3 shows limited conversion at about 80%. Furthermore, higher degree of polymerization is obtained by photoinitiated polymerization of 1 compared to 2 and 3. This shows that the 3-oxobutyl substituent at the phenyl ring of 1 significantly affects both polymerization kinetics and final conversion of the photoinitiated polymerization. Moreover, an additional higher molecular weight fraction is observed in case of polymerization of 1 at 85°C that is above the glass transition temperature of the polymer formed during photoinitiated polymerization. As a thermal polymerization at 85°C in the absence of light results in a high molecular weight polymer as well, an additional thermal process may be discussed as reason for the higher molecular weight polymer fraction in case of the photopolymer made at 85°C.     

Synthesis of Highly Fluorinated Arene Complexes of [Rh(Chelating Phosphine)]+ Cations,and their use in Synthesis and Catalysis

The synthesis of rhodium complexes with weakly binding highly fluorinated benzene ligands is described: 1,2,3-F₃C₆H₃, 1,2,3,4-F₄C₆H₂ and 1,2,3,4,5-F₅C₆H are shown to bind with cationic [Rh(Cy₂P(CH₂)_xPCy₂)]⁺ fragments (x=1, 2). Their structures and reactivity with alkenes, and use in catalysis for promoting the Tishchenko reaction of a simple aldehyde, are demonstrated. Key to the synthesis of these complexes is the highly concentrated reaction conditions and use of the [Al{OC(CF₃)₃}₄]⁻ anion.     

Cobalt(II)-Catalyzed [4+2] Annulation of Picolinamides with Alkynes via C−H Bond Activation

A cobalt(II)-catalyzed [4+2] annulation of picolinamides with alkynes via C−H bond activation has been developed. The operationally simple annulation reaction allows for the synthesis of acyl-substituted 1H-benzoquinoline bearing multiple aromatic rings (up to 96 % yield) without co-oxidant or other oxidation factors under mild conditions. Several control experiments were carried out. This practical [4+2] annulation provides an efficient route to access highly functionalized compounds.     

柠檬果茶中游离态和键合态挥发性成分分析

以柠檬果茶为研究对象,建立了顶空固相微萃取前处理结合气相色谱质谱联用技术测定其中挥发性化合物的分析方法。采用开水冲泡对样品进行提取,通过Amberlite XAD-2大孔吸附树脂对柠檬果茶中的糖苷类挥发性组分键合,分离游离态和键合态化合物,甲醇溶剂作为洗脱剂对键合态化合物进行洗脱,Almondsβ-D-葡萄糖苷酶对其酶解。使用气质联用对样品中游离态和键合态挥发性成分进行检测,其结果根据数据库匹配和对比文献保留时间定性,内标法进行定量。结果表明,柠檬果茶中含有游离态物质24种,键合态物质16种,主要为(+)-柠檬烯、1-辛醇、橙花醇、(-)-4-萜品醇、alpha-松油醇等。方法为花果茶干燥工艺提供参考。     

Exhaustive search of the configurational space of heat-shock protein 90 with its inhibitor by multicanonical molecular dynamics based dynamic docking

Multicanonical molecular dynamics based dynamic docking was used to exhaustively search the configurational space of an inhibitor binding to the N-terminal domain of heat-shock protein 90 (Hsp90). The obtained structures at 300 K cover a wide structural ensemble, with the top two clusters ranked by their free energy coinciding with the native binding site. The representative structure of the most stable cluster reproduced the experimental binding configuration, but an interesting conformational change in Hsp90 could be observed. The combined effects of solvation and ligand binding shift the equilibrium from a preferred loop-in conformation in the unbound state to an α-helical one in the bound state for the flexible lid region of Hsp90. Thus, our dynamic docking method is effective at predicting the native binding site while exhaustively sampling a wide configurational space, modulating the protein structure upon binding.     

Synthesis,characterization, and some electrocatalytic properties of heteromultinuclear FeI/RuII Clusters

A series of new heteromultinuclear Fe^I/Ru^II clusters are described. The complexes (η⁶-arene)RuFe₂S₂(CO)₆ (arene = p-cymene 1 , C₆Me₆ 2 ) and Fe₂[μ-S (Cp*Ru)(CO)₂]₂(CO)₆ (Cp* = η⁵-C₅Me₅) ( 3 ) were prepared by the reduction reactions of (μ-S)₂Fe₂(CO)₆ with 2 equiv of LiHBEt₃, followed by treatment (μ-SLi)₂Fe₂(CO)₆ with ruthenium-arene complexes Ru₂(μ-Cl)₂Cl₂(η⁶-arene)₂ or Cp*Ru (CO)₂Cl in 22–33% yields. Further reactions of 1 and 2 with 1 equiv of triphenylphosphine in the presence of the decarbonylating agent Me₃NO·2H₂O, afforded the corresponding monophosphine-substituted Fe^I/Ru^II complexes (η⁶-arene)RuFe₂S₂(CO)₅(Ph₃P) (arene = p-cymene 4 , C₆Me₆ 5 ) in 75% and 78% yields. While treatment of parent complex 1 or 2 with 1 equiv of diphosphine Ph₂PCH₂PPh₂ (dppm) in xylene at reflux temperature resulted in the formation of the diphosphine-bridged RuFe₂S₂(CO)₉ derivate RuFe₂S₂(CO)₇(dppm) ( 6 ). The possible pathway for the formation was proposed. Two isomers of novel macrocyclic complexes involve the (η⁶-arene) Ru-bridged quadruple-butterfly Fe/S clusters [{μ-S (CH₂)₃S-μ}{(μ-CS₂)Fe₂(CO)₆}₂]₂[(η⁶-arene)Ru]₂ (arene = p-cymene 7a and 7b , C₆Me₆ 8a and 8b ) were isolated by reactions of two μ-CS₂-containing dianion [{μ-S (CH₂)₃S-μ}{(μ-S=CS)Fe₂(CO)₆}₂]²⁻ with [Ru₂(μ-Cl)₂Cl₂(η⁶-arene)₂], in which the propylene groups are attached to two S atoms by ee and ea types of bonds respectively. All the new complexes 1 – 8 have been characterized by elemental analysis, spectroscopy, and particularly for 1 – 6 , 7b and 8a by X-ray crystallography. In addition, the electrochemical properties of representative complexes 1 – 4 and 6 have been investigated.     

An improved particle shifting technique for incompressible smoothed particle hydrodynamics methods

The smoothed particle hydrodynamics (SPH) method is one of the powerful Lagrangian tools for modeling free surface flows. However, it suffers from particle disorder, which leads to interpolation and numerical errors. To overcome this problem, several techniques have been introduced until now, among which the particle shifting technique (PST) based on Fick's law is an efficient one. The current form of this method needs tuning parameters to fulfill numerical stability criteria. In this study, to eliminate calibration factors, a new shifting coefficient is derived theoretically based on particle positions before and after shifting, regardless of other parameters such as velocity, pressure, time step intervals, etc. The only required input is particle positions, and the main concern is conserving particle densities in their updated positions. In addition to the proposed PST, a new distribution index (DI) is introduced for measuring the spatial uniformity of particles. Furthering the research, some novel treatments are also studied to improve particle movements near free surface boundary. The proposed idea is only assessed for ISPH method in this study, and its performance in other SPH schemes needs more investigations. Following this innovative method, it is validated by modeling different cases including dam break flow, paddle movement, and elliptical water drop. In all cases, particle arrangements have been improved by means of the modified shifting method. In that sense, good agreements between simulation results with experimental data, analytical solutions, and other numerical methods approve the ability of the developed method in simulating free surface flows.